Glenn Cronkhite -
Horn Pro - Bam
France - Marcus Bonna -
ProTec - SKB - Bags of
Spain - Diversified
Glenn
Cronkhite Custom Cases
|
Glenn Cronkhite is the master case maker. His light weight cases
are hand made in Berkeley, California. Remember when Reunion Blues
cases were made in San Francisco? (They're made in China now.) That
formerly famous line was really Glenn Cronkhite cases made under
license. With the RB factory closed, Glenn is again making all the
cases himself, either the same as the old RB line, or improved, with new style
and a variety of new colors. I have many styles in stock, including many no
longer available from Reunion Blues, and all of these are much higher quality
cases than their Chinese made lineup IMHO. Please call for price and
availability on other styles not listed, or for custom work. Read
more
on Glenn Cronkhite and Reunion Blues.
A while back I got a shipment of cases from Glenn that included
one of the compact tenor trombone cases in this incredible cinnamon
brown leather. I assimilated it into my collection immediately to
house my Shires jazz tenor, and I promptly sold old case. This
Cronkhite case is much lighter, easier and more comfortable to carry,
doesn't have sharp square corners, and......looks incredible!!! I
mean, what kind of statement do I want to make about my musicianship
and my equipment? Production case, or a beautiful brown leather case
hand made by my friend in Berkeley? It was an easy choice. If you
want style, light weight, and the ultimate in protection for a soft
case, these are the bomb!
All Cronkhite trombone cases are the new G style, which stands for
gusset, and are sort of squarish, with the slide pocket inside the
main compartment of the bag for better protection. There is much less
stress on the zippers than with the older style cases. A wooden disk
is now sewn inside the bell end of the bag . Most have double
shoulder straps to allow you to carry the bag like a backpack. Single
straps are available by special order. The older Reunion Blues O
style trombone case style is no longer available, due to the high
stress on zippers and seams and the high amount of warranty repairs
that were required.
These cases are not cheap, but they are handmade like no others
and will last you a lifetime. They have the firmest foam, wood
reinforcements, gold plated steel hardware, top quality zippers, and
heavy duty extra thick boot and saddle type leather. They can be
repaired and rebuilt by Glenn for a reasonable price. He will also
repair older Reunion Blues cases, call for info.
These aren't your father's gig bags. They are a much higher
quality product. If you tend to injure your horn and need a hard
case, go with that, but if you want a lighter sleeker case with
excellent protection for its weight, this is the best choice. I use
them for all my instruments.
Weights of Cronkhite cases may vary due to
thickness of the leather. For comparison, a Conn 88H case weighs 11.5
pounds, and a Bach 12 case weighs 13 pounds.
I keep most of these styles in stock in black for immediate
shipping, and I have many in some spectacular colors and two-color
combinations. Other colors can ship in 2 weeks. Don't be afraid of
color, choose something that will stand out. Have fun and enjoy the
art of the case.
Colors - pick any two
Leather - black, burgundy wine, dark chocolate brown, cinnamon
brown, medium brown, British tan. red
Fabric - black, burgundy wine, forest green, dark blue, brown, tan
|
|
Instrument
|
Specs
|
Part Number & Weight
|
Price
|
Alto trombone or bass trumpet
|
Fits all alto trombones and bass trumpets, up to 8" bell.
Single removable shoulder strap. Pictured is an alto case in
black cordura.
|
Cordura TBN ALT-C 3.75 lbs Leather TBN ALT-L
|
$240 $185$380 $300
|
Compact tenor trombone
|
This is the smallest and lightest trombone case around.
It's a sleekest, narrowest version of these cases. Fits
horns without F attachments, up to 8" bell, essentially all
jazz horns. Single removable two position shoulder strap.
Pictured are cinnamon brown leather and black and red
leather. If you want everyone in sight to say, "Nice case",
that black and red one will have the desired effect. Also
shown is an interior view, with a Shires small bore tenor
trombone inside. Includes clip guard for comfort when
carrying over your shoulder.
37x10x9", 3.5" wide at the narrow end |
Cordura TBN TSG-C 5 lbs Leather TBN TSG-L 6 lbs
|
$270 $205$420 $333
|
|
Compact tenor trombone 2-piece travel case




 |
For those who find the above case too large, Glenn now makes a
two-piece case, in the style of the old Reunion Blues trombone gig
bags, but this improved version offers much better protection, and
it much more versatile for travel. The slide pocket is a
separate case with its own should strap. it has wood on both
sides, and can be easily removed from the bell case. The bell
case is a bit smaller than the case above, so when taken apart, both
pieces can be carried onto ANY plane. If you get vibed by the
gate attendant, simply snap your two cases apart, and say, "What?
These two little things? Of course they'll fit." cordura 5
lb
leather 8 lb |
Cordura TBN TSBO-C + TSC-C Leather TBN TSBO-L + TSC-L
|
$328
$466 |
Small to medium tenor trombone
|
Fits all straight tenor trombones without F attachment up to 8"
bell, and some medium bore horns with F attachment for a
slightly tighter fit. Fine case for a Bach 36B, or for those
wanting a bit more room inside for their King 3B. Double
backpack style shoulder straps. Pictured is a TTG in black
cordura.
37x10x10" |
Cordura TBN TTG-C Leather TBN TTG-L
|
$284 $205$434 $333
|
Large tenor trombone
|
Fits all large tenor trombones with F attachment, up to
9" bell, with room for your stuff. Try this for Conn 88H,
Bach 42B, and similar horns. Double shoulder straps. Also
fits single valve bass trombones up to 9.5" bell, though
it's a tighter fit. Pictured in black cordura with burgundy
sides, material is less red than it appears. Also shown in
dark chocolate brown leather. The lower picture is a top
view showing the interior. Inside is a Shires tenor trombone
with Thayer valve. Any trombone without F attachment can
also fit fine inside this case, or we can order a narrower
version called the BTGS, which is built like the slim TSG
case above, but for an 8.5" bell no-valve horn, like the
Conn 8H. Call for details.
37x10x10" |
Cordura TBN BTG-C 6 lbs Leather TBN BTG-L 8 lbs
|
$308 $231$462 $347
|
|
Large tenor trombone or small bass trombone
2-piece travel case





|
This case holds all large tenor trombones with F attachment, and most
single and double valve bass trombones with up to 9.5" bell.
The two pieces can be separated for airline travel, for those times
when you must carry your horn on the plane. Let us know if
your bell section is over 28.5" long, or if you have a double valve
bass trombone and want a small hump in the top of the case to allow
more room for the D paddle. Custom length and the bass hump is
available at no extra charge. cordura 5 lb
leather 8 lb |
Cordura TBN BTBO-C + TSC-C Leather TBN BTBO-L + TSC-L
*please specify if you have a long open wrap or dependent valve bass
trombone when ordering this case |
$329
$483 |
Bass trombone
|
Fits all bass trombones up to 10.5" bell, very roomy,
fits all valve styles, now has bulge in the top for better
fit around second valve paddle, double shoulder straps.
Pictured is my new personal bass trombone case in green and
black leather with an optional end handle, and the sleek
dark brown and British tan leather.
37x11x11" |
Cordura TBN BBG-C 6 lbs Leather TBN BBG-L 7.5 lbs
|
$326 $245$514 $385
|
|
Large bass trombone 2-piece travel case



|
This case holds all double valve bass trombones. The two pieces
can be separated for airline travel, for those times when you must
carry your horn on the plane. This is the best fit for bass
trombones with large valves or very open wraps, and whose bell is
over 9.5". This does not fit as well in all commercial
aircraft overhead bins, so we recommend the medium sized BTBO,
above, unless you absolutely need a case this large. Can be
made in a longer length if your bell section is over 28.5" long.
cordura 6 lb
leather 9 lb |
Cordura TBN BBBO-C + TSC-C Leather TBN BBBO-L + TSC-L
*please specify if you have a long open wrap or dependent valve bass
trombone when ordering this case |
$338
$483 |
Small double trombone
|
Fits 2 trombones, either a large and small tenor, or many
smaller bass trombones and a small tenor. Similar size to the
BTG, very compact bag for its capacity, double shoulder
straps. Pictured in black leather with medium brown sides.
39x10x10"
Scroll down to see an interior view of a double trombone
case.
|
Cordura TBN DBS-C 6.25 lbs Leather TBN DBS-L 8.5 lbs
|
$366 $280$560 $420
|
Large double trombone
|
Fits any bass trombone and any tenor trombone with F
attachment, large bag, not as easy to tote as the above DBS
bag, but very roomy with ability to hold any two horns
easily, double shoulder straps with large pads, removable
end handle. I even carry two bass trombones in one of these.
Pictured in black cordura with midnight blue sides. Also
shown is a top view of the interior, with a Kanstul bass
trombone and Shires tenor trombone inside.
40x13x13" |
Cordura TBN DBL-C 7.5 lbs Leather TBN DBL-L 8.25 lbs
|
$480 $335$660 $495
|
Contrabass trombone and cimbasso
|
Fits all F contrabass trombones, Alexander, Haag, Thein,
Glassel, and some F cimbassos, including Rudy Meinl and
Mirafone. Pictured in black leather.
46x15x13" |
Cordura TBN CON-F-C Leather TBN CON-F-L 11 lbs
|
$410 $310$650 $485
|
Mirafone BBb contrabass trombone
|
Fits the Mirafone BBb contrabass trombone, same case as
TBN BBG but with a wider slide pocket to accommodate the
double slide. Pictured in black cordura with forest green
sides.
37x11x11" |
Cordura TBN BBC-C 6 lbs Leather TBN BBC-L 7.5 lbs
|
$336 $235$524 $340
|
Valve trombone
|
Fits all valve trombones, up to 9" bell. This is the TBN
BTG case with a wider slide pocket. Pictured in midnight
blue cordura.
37x10x10" |
Cordura TBN BTV-C 6 lbs Leather TBN BTV-L 8 lbs
|
$318 $231$472 $347
|
Valve Trombone with both a valve and slide
compartment
|
Fits all valve trombones with up to a 9" bell. Wide
double slide pocket holds both a slide and valve section.
This is the TBN DBS case with a different slide pocket. Case
looks the same as the above DBS. Pictures in two-tone black
and brown leather.
39x10x10" |
Cordura TBN DBV-C Leather TBN DBV-L
|
$368 $233$572 $355
|
Tenor trombone mute bag
|
13.5 x 10 x 6.5", cordura fabric with leather trim, slips
over trombone case handle, 1.4 lbs. in cordura
|
Cordura TBN TMT-C Leather TBN TMT-L
|
$130 $84$175 $115
|
Bass trombone mute bag
|
17 x 13.5 x 8", cordura fabric with leather trim, slips
over trombone case handle, 3.4 lbs. in leather
|
Cordura TBN BMT
|
$154 $98
|
|
Padded cloth accessory pouches, zipper closure
|
8.5 x 5" Small $10 10.5 x 6.5" Medium $12
10.5 x 8.5 Large
New straight neckpipe bag
|
TBN LPS TBN LPM
TBN LPL
TBN NECK.
|
$10 $12
$15
$15
|
Horn Pro Music Mute
Bag
|
Case
|
Specs
|
Part Number
|
Price
|
|
New from our friends at Horn Pro Music in Taiwan is the
hand made mute bag with padded dividers to protect your
mutes from each other. Also features and external water
bottle sleeve and trombone stand sleeve. Includes shoulder
strap, side pocket, Cordura construction
|
MTBG-TTq
|
$130
|
Bam France
|
Case |
Specs |
Part Number |
Price |
| Softpack Jazz Trombone
 |
New case with sleek gloss hard
plastic top in several colors, with scuff-proof plastic bottom, firm
padded sides with zipper closure allow the case to gently squeeze your
horn so there is no movement inside. Horns such as Shires with large F
attachment thumb paddles may need a small pad in between trigger and
slide due to the small size of the case. These cases are also
available with a small exterior pocket, but we order them without the
pocket, as they are much sleeker. Metallic black or terra cotta.
Fits small tenor trombones without F
attachment |
4031S |
$305 |
| Softpack Tenor Trombone
 |
Same as above for all
trombones with F attachment |
4030S |
$320 |
| Softpack Bass Trombone
 |
Same as above for most bass trombones.
Shires with Thayer or Trubore valves may be too big for this
case. Does not fit trombones with tuning in the slide. |
4032S |
$350 |
Marcus Bonna
|
These are indestructible fiberglass cases made in
Brazil. Sleek shape with outer nylon fabric and leather trim. Includes
numerous Velcro attached pads to customize the case for a perfect fit. They
do not stay in stock long and we get orders every 6 months or so. Make sure
to call to reserve one or order a custom color or material. This is one of
the best cases you can get. |
| Case |
Specs |
Price |
| MBT
|
Standard tenor trombone case, will fit all tenors up
to a 9" bell flare and fits a standard straight mute inside the
bell. Has a large accessory pocket inside the case and on the
outside, also has straps to hold a trombone stand. Backpack and shoulder
straps included. Fiberglass shell case with replaceable cover in the
event
yours gets worn. Velcro pads can be adjusted inside the case to
perfectly fit your trombone. |
nylon- $430 leather- $580 |
|
NEW MBT
Lightweight

 |
New from Marcus Bonna, lightweight tenor
trombone case. A smaller wider case than the standard tenor. Velcro
pads make a custom fit for your trombone. Backpack and shoulder
straps included. This is really an ingenious design. The
parts of your horn fit closely, but they'll never touch if you
put them in right. Tip: the water key of your slide
goes down on the right side, and the slide connector goes down
on the left side, in a little hole. A small foam pad will
keep the slide away from the bell. |
nylon- $430 leather- $580 |
| MBB



 |
Bass trombone case, compact and lightweight. An
excellent case that offers protection and versatility. Bass trombone
cases are usually bulky and non protective. This case solves all of
the problems. Velcro padding inside can be adjusted to fit whatever
valve combination you have on your bass. Can also be used for
large tenor trombones, and since it doesn't hold a mute like the
MBT, it's a shorter case. Designed for 9.5"-10" bell.
We can also order the XL version for 10.5" bells. Please
ask. No extra charge. |
nylon- $430 leather-$580 |
ProTec
| Universal fit tenor trombone ProPac
case

|
The best of Protec's trombone cases for
many years, this is
a case for all tenor trombones, with or without F attachment,
up to 9" bell, firm Styrofoam construction with light wood laminated on the
outside, cloth covered with zipper closure, in black, includes
large side pocket with organizer and single shoulder strap. May
need a small amount of extra padding due to a loose fit on some
horns, just put your polishing cloth over the top. 10.5 lbs,
PB306CT-O
SPECIAL $150 Backpack strap kit available for this
case, $14 item #BPSTRAP
Does not fit long slide Conn 70H, 71H or 72H trombones. |
| NEW 2008
large tenor trombone case

 |
New compact, sleek design with plush interior, fits all trombones
with F-attachment, up to 9.5" bell. Two small interior storage compartments, plus
large outer pocket, single shoulder strap. Looks like Bam Classic case. $200
PB306CT Backpack strap kit available for this case, $14 item #BPSTRAP |
| NEW 2008
bass trombone ProPac case

 |
New bass trombone case is much smaller than previous models.
It's reasonably priced, not too weighty, and has a plush padded velvet
lined interior. Includes two small interior pockets and one large
outer pocket with organizer and single shoulder strap. Seems to it
every bass trombone we've tried, even Shires with stacked axial valves,
though a small padded cloth over the D paddle will help keep the bell
and slide away from each other in extreme situations. $220 PB309CT
Backpack
strap kit available for this case, $14 item #BPSTRAP
|
| Backpack strap kit
 |
Backpack strap kit, fits all current production Protec trombone
cases, BPSTRAP $14 |
SKB
|
Case |
Specs |
Part Number |
Price |
|
360 small tenor trombone
case
 |
Fine molded light weight plastic case with
metal trim and latches, D-rings for shoulder strap mounting, firm
cloth covered Styrofoam interior, foam can be compressed for an exact
fit for your horn, lifetime limited warranty, very popular among
local musicians who travel, probably not strong enough to last forever if
checked on a a plane flight, but it's small enough to carry on under
most circumstances. 7.5 lbs. |
SKB360 |
$105 |
|
462 large tenor trombone case
 |
Heavy duty molded plastic case fits all
large tenor trombones with F attachment, up to 9" bell. D-rings for
shoulder strap mounting, small external pocket, lifetime limited
warranty, firm cloth covered Styrofoam interior, can be molded to fit your horn,
will fit Shires and other Thayer valve equipped tenor trombones.
Indestructible looking case, worthy of checking on a flight. 10 lbs. |
SKB462 |
$150 |
Bags of Spain
|
Case |
Specs |
Part Number |
Price |
|
Bags of Spain Bass Trombone Case

 |
High quality bass trombone case with lightweight wood
construction, zipper closure, and cloth outer cover. We like that
this case will fit any bass trombone, even stacked axial flow valves,
which don't easily fit in other cases. The inside is soft and
cradles your horn well. An outside sheet music pocket, and
backpack straps are standard. Black. Somewhat bulkier than
Bam or Bonna, this case still seems more compact than the Protec case,
and fits all horns more securely. |
BOSBT |
$290 |
Diversified
|
Case |
Specs |
Part Number |
Price |
|
NEW
Tenor Trombone Road Case

 |
This new case is made in Rome, New York, USA, by the
Diversified Case Company. Called "The Tank", it looks to be a
worthy case for the frequent air traveler. Its sides are extruded
aluminum, with black plastic top and bottom. Wheels, top and end
handles, and flush fitting, non-locking latches are standard. The
interior is made of laminated layers of 1" firm open cell foam, with
areas cut out to gently cradle your horn. Two pieces of soft
memory foam surround the bell section. A slot for a cleaning rod
is cut into the base, though on our samples, it may need to be cut a
little longer. This is an easy job with any sharp knife.
This is designed to fit any tenor trombone with F attachment, though it
looks to be a fine fit for smaller straight trombones too. Some concerns addressed: We were worried about
the exposed foam scratching the finish of the instrument. The
owner of Diversified got an old trombone and a piece of this foam, and
rubbed them together for as long as his attention span held out.
Verdict: no scratching. Also, one vendor had a concern that
the aluminum valence could get bent during rough handling, and then the
case won't close well. While it's still a new model, we believe
it's a proven design, and Michael McGuire, their trombone-playing sale
rep, has sustained no injuries to his horn or the case, despite throwing it
around for all who will watch. Replacement interior foam will be
available if yours wears out. 9.5x12x40", 18 lbs. 10 oz. (24x30x102
cm, 8.5 kg) |
divtb |
$400 |
|
NEW Bass Trombone Road Case

 |
A larger version of the above case for double valve
bass trombones.
12x15x40", 24 lbs. 10 oz. (30x38x102 cm, 11.2 kg) |
divbtb |
$475 |
|
Contrabass Trombone Road Case |
Coming soon...a special case for the
Kanstul F contrabass trombone. Should also fit Thein, Haag, Voigt,
Rath, and Latsch. Might also fit Glassl, if the slide is not too
long. Stay tuned. |
divcb |
TBA |
|